Cutting Tools – Automotive Repair Equipment

Cebora Power Plasma

ncsweldingmanager — Tue, 30 Apr 2019 20:11:06 +0000

POWER PLASMA 3035/M is an easy to handle, easy to use power source with minimal system requirements, able to ensure excellent quality cutting on all metals, including the new high-strength steels.

POWER PLASMA 3035/M weights just 13 kg including the torch, and requires single-phase power supply; it works with compressed air or nitrogen (for high-quality cutting), provided at a pressure of 3.5 bar, with an air flow of just 60 l/min (and may thus be powered by a 25-l compressor).
The recommended thickness, for the best cutting quality and productivity, is 8 mm; the maximum thickness is 12 mm and the severance thickness is 15 mm.

Automatic voltage change (115/230 V +15% / -20%).

Pilot arc operating mode, which makes it possible to work even on painted or coated metals.
Pilot self-restart, selectable from the panel, to interrupt and automatically reset the arc when cutting screens and grids, increasing operator productivity.
Nozzle holder protection, as required by standards IEC 60974-7, which eliminates the risk to the operator of direct accidental contact with the gas nozzle.
High voltage arc striking with high frequency, to ensure reliable lighting of the pilot arc and reduced disturbances.
High electromagnetic compatibility, per IEC 60974-10, allowing the power source to be used in the vicinity of electronic equipment (such as computers, PLC, etc.).
Explosion-proof protection of the air reducer unit.

In the version for automation, which also requires the pantograph interface kit (Art. 196), the power source is equipped with a Cebora CP40 DAR straight torch of 6 or 12 m.

The compliance with EN 61000-3-12 brings substantial energy saving and a wide supply voltage tolerance (+15% / -20%).

AC 06 disc cutter

ncsweldingmanager — Thu, 27 Dec 2018 02:59:26 +0000

AC 06 disc cutter

Working pressure:	6 bar
Net weight:	0,980 kg
Packing unit:	1 pc.

LC04 angle grinder

ncsweldingmanager — Thu, 27 Dec 2018 02:52:35 +0000

LC04 angle grinder

Working pressure:	6 – 8
Rotational speed:	18.000
Net weight:	0.89, 0,890 kg
Air consumption:	0,085
Material:	Steel, aluminium, plastic
Noise level:	82
Packing unit:	1 pc.
Vibration:	< 0,9

Straight grinder red 20000 rpm

ncsweldingmanager — Thu, 27 Dec 2018 02:45:24 +0000

Straight grinder red 20000 rpm

Working pressure:	6-8 bar
Rotational speed:	20.000 U/min.
Net weight:	0.87
Material:	Steel, aluminium, plastic
Packing unit:	1 pc.

Angle Grinder GTC-986 / 1/4″ pneum

ncsweldingmanager — Thu, 27 Dec 2018 02:40:06 +0000

Angle Grinder GTC-986 / 1/4″ pneum

Working pressure:	6 bar
Specifics:	Drive pneumatic, Antrieb pneummatisch
Rotational speed:	20.000 U/min.
Net weight:	1.08
LängexBreitexHöhe:	193 mm
Output:	190 W
Air consumption:	0,085 m³/min.
Material:	Steel, aluminium, plastic
Noise level:	87 dB(A)
Packing unit:	1 pc.
Vibration:	2,5 ms²

Angle Grinder FX-8125LA / 1,4″ pneum

ncsweldingmanager — Thu, 27 Dec 2018 02:33:52 +0000

Angle Grinder FX-8125LA / 1,4″ pneum

Working pressure:	6 bar
Rotational speed:	9.500 U/min.
Gross weight:	2,150 kg
Net weight:	1,800 kg, 2.15
LängexBreitexHöhe:	230 mm
Output:	745 W
Air consumption:	0,17 m³/min.
Noise level:	83 dB(A)
Packing unit:	1 pc.
Vibration:	4,4 m/s²

Straight Grinder GTC-082ASW

ncsweldingmanager — Thu, 27 Dec 2018 02:30:51 +0000

Straight Grinder GTC-082ASW / 1,4″ pneum

Working pressure:	6 bar
Rotational speed:	20.000 U/min.
Gross weight:	0,890 kg
Net weight:	0,685 kg, 0.87
LängexBreitexHöhe:	220×70 mm
Output:	400 W
Air consumption:	0,085 m³/min.
Noise level:	87 dB(A)
Packing unit:	1 pc.
Vibration:	2,5 m/s²

Mini Angle Grinder pneumatic

ncsweldingmanager — Thu, 27 Dec 2018 02:23:50 +0000

Mini Angle Grinder pneumatic

Car Body Repair Equipment

Powerful mini-angle grinder for hard to reach places.

Laser Cutter LC04 pneumatic

ncsweldingmanager — Thu, 27 Dec 2018 02:02:43 +0000

Laser Cutter LC04 pneumatic

Car Body Repair / Work Shop Equipment

Cutting and removing of Laser-welding-seams and Laser-brazing seams. Newly developed cutting wheels made out of full-tungston-carbide with innovative duplex sharpening for clean grinding of the laser seams – comes with grinding depth

WS40 Plasma Cutter

ncsweldingmanager — Thu, 27 Dec 2018 01:43:11 +0000

WS40 Plasma Cutter, 230V/1PH

Plasma Cutter

Inverter plasma cutter for car body repairs.

Precise cutting – fast and efficient
Micro processor controlled
Simply set material thickness for steel, stainless steel
air volume control